ps:剛查了一下官網更新Ver.2.20 http://www.fujifilm.com/support/digital_cameras/software/firmware/x/xe1/index.html 內文提到: 2.Function to enable "Command dial" to control aperture setting for XF/XC lens without an aperture ring is added. This function is for the XF27mmF2.8 and XC16-50mmF3.5-5.6 OIS which don't have an aperture ring. On the Shooting Mode, "APERTURE SETTING" is added and one of "AUTO+MANUAL", "AUTO" and "MANUAL" can be selected. For detail of how to operate, please refer to the operation manual "Before Using This Product" bundled with above lenses. <Note> The "APERTURE SETTING" will be newly appeared, but it is not selectable unless either XF27mmF2.8 or XC16-50mmF3.5-5.6 OIS is attached to a camera.
雖然只是修正光圈環的問題但不知有沒有順便修正桶狀變型…其待ing
This entry passed through the Full-Text RSS service — if this is your content and you're reading it on someone else's site, please read the FAQ at fivefilters.org/content-only/faq.php#publishers.
You are receiving this email because you subscribed to this feed at blogtrottr.com.